06. GPS-N
OIL TRANSFER SUCTION UNITS- N
N: 1 pump
Applications & Specific Features
- Oil supply to appliance by gravity feed, GPS unit must be higher than appliance(s).
- Various GPS models available with different sizes of reservoir.
- Standard unit has 2 outlets for 2 appliances, more outlet versions available to special order.
- Suction lift 9m vertical or 200m horizontal. See performance curves (Datasheet).
- Oil supply installations using ‘dead leg’ pipework. GPS unit does not need external controls.
- Anti siphon valve or ‘normally closed’ solenoid valve required at the main oil tank when oil level in tank is above GPS level.
- Special GPS models available with greater reservoir, for acting as power generator reservoir
- Special GPS models available with larger flow, for high output or modulating burners
Technical Characteristics
- Voltage free general alarm outlet.
- Output to attach anti-siphon solenoid valve.
- Oil leak collector tray with infrared detector.
- Safety thermostat (40ºC) for temperature gasification.
- Suction pipe couplings for two burners and one for returns.
Accessories and adaptations
- 8 free relay outputs outlets
| MODEL | GPS-35 N | GPS-70 N | GPS-130 N | GPS-200 N | GPS-350 N | GPS-950 N | GPS-1500 N | |
|---|---|---|---|---|---|---|---|---|
| FLOW | l/h | 30 | 70 | 130 | 200 | 350 | 950 | 1500 |
| POWER SUPPLY (50 Hz) | VOLTS | 230/400 single-phase | 230/400 tri-phase (*) | 230/400 tri-phase (*) | 230/400 tri-phase (*) | 230/400 tri-phase (*) | 230/400 tri-phase (*) | 230/400 tri-phase (*) |
| MOTOR POWER | C.V. | 1/6 | 1/4 | 1/3 | 1/3 | 1/3 | 3/4 | 1 |
| RECOMMENDED SUCTION PIPE | mm Ø (OD) | 12 | 15 | 15 | 18 | 22 | 25 | 32 |
| SUCTION | BSP Thread | G 3/8”F | G ½”F | G ½”F | G ¾”F | G ¾”F | G 1”F | G 1 ¼” F |
| RETURN PIPE BURNER | BSP Thread | G 3/8”F | G ½”F | G ½”F | G ½”F | G ¾”F | G ¾”F | G ¾”F |
| TANK CAPACITY | lts. | 13,6 | 35 | 35 | 35 | 163 | 163 | 217 |
| MOTOR PROTECTION | IP | 20 | 55 | 55 | 55 | 55 | 55 | 55 |
