FP N/GE FUEL TRANSFER SKID TO DAY TANKS

Applications & Specific Features

• Main tank to daily service tank oil transfer.
• Oil supply to one or multiple generators.
• Installations with large height differences between main storage and daily service tanks.
• Any oil supply for ‘tank to tank’ automated by a signal from the daily tank level switch to the FP unit.
• Special FP units available for aggressive or heated non standard fuels.

Accessories and adaptations

• Oil failure control system, to protect gears running with an empty tank.
• Free voltage relay output to control from centralised Building Management System, in kit 3, 4 or 6 signals (2-thermal, motors 1 or 2 ON, low pressure and Leak safety ON).
• GSM alarm system by SMS messages, or connection to modem.
• Adaptation of Pressure Group for high pressure, working conditions of up to 4,5 Kg/cm2
• Leak collector trays with infrared detectors (standard in FP 240 and above)
• Modifications to adapt to specifically regulated environments (tropicalised equipment or ATEX.)
• Solenoid valves with flow limiters, to automate filling in supply tanks for electrical generators.
• Soundproof sheet cabinets with UNE-25 poly-pyramid foam and lock. Manufactured with no back and made-tomeasure for each Pressure Group model.
• Assembly of Pressure Groups in IP-55 cabinets for outdoor installation wi

  MODEL		FP 10	FP 23	FP 41	FP 90	FP 120	FP 240	FP 360	FP 570
  MAX. FLOW	l/h	100	260	460	900	1400	2100	3400	5300
  SUPPLY VOLTAGE	VOLT	400*	400*	400*	400	400	400	400	400
  MOTOR POWER	KW	0,25	0,25	0,25	0,55	0,55	2,2	3	3
  	CV	1/3	1/3	1/3	3/4	3/4	3	4	4
  MOTOR	r.p.m	1400	1400	1400	1400	1400	1400	1400	1400
  CONNECTION TO THE HYDRAULIC CIRCUIT (Ø THREAD / Ø MM)	SUCTION	1/2” F	1/2” F	1/2” F	1” F	1” F	DN 32	DN 40	DN 40
  	DRIVE	1/2” F	1/2” F	1/2” F	1” F	1” F	DN 32	DN 40	DN 40
  	OVERPRESSURE	1/2” F	1/2” F	1/2” F	3/4” F	1” F	DN 32	DN 40	DN 40
  SOUND LEVEL	dB (A)	58	58	58	58	58	58	58	58
  MOTOR PROTECTION	IP	55	55	55	55	55	55	55	55

  - (*) There is a 230 single-phase version power supply version (W) - For other capacity and mediums, please consult. - Threaded Flanges DIN 2566